Microfrese con gambo rinforzato
Micro end mills with reinforced shank
| Applicazioni / Application |
Adatte per fresature di materiali a media-alta resistenza, particolarmente indicate per fresatura a copiare in semifinitura e finitura. |
| Materiale / Material |
Metallo duro micrograna ISO K20-K40 |
| Norma / Norm |
Standard Utensili Services |
| Rivestimento / Coating |
HYPERCUT |
| Codice | d1h10
mm | d2h6
mm | l1
mm | l2
mm | l3
mm |
| 158.005.02 | 0.5 | 4 | 50 | 1 | 2 |
| 158.005.04 | 0.5 | 4 | 50 | 1 | 4 |
| 158.005.06 | 0.5 | 4 | 50 | 1 | 6 |
| 158.010.06 | 1 | 4 | 50 | 1.5 | 6 |
| 158.010.08 | 1 | 4 | 50 | 1.5 | 8 |
| 158.010.10 | 1 | 4 | 50 | 1.5 | 10 |
| 158.010.12 | 1 | 4 | 50 | 1.5 | 12 |
| 158.015.08 | 1.5 | 4 | 50 | 2 | 8 |
| 158.015.10 | 1.5 | 4 | 50 | 2 | 10 |
| 158.015.12 | 1.5 | 4 | 50 | 2 | 12 |
| 158.015.16 | 1.5 | 4 | 50 | 2 | 16 |
| 158.020.08 | 2 | 4 | 50 | 3 | 8 |
| 158.020.10 | 2 | 4 | 50 | 3 | 10 |
| 158.020.12 | 2 | 4 | 50 | 3 | 12 |
| 158.020.16 | 2 | 4 | 50 | 3 | 16 |
| 158.020.20 | 2 | 4 | 50 | 3 | 20 |
| 158.025.10 | 2.5 | 4 | 50 | 3 | 10 |
| 158.025.12 | 2.5 | 4 | 50 | 3 | 12 |
| 158.025.16 | 2.5 | 4 | 50 | 3 | 16 |
| 158.025.20 | 2.5 | 4 | 50 | 3 | 20 |
| 158.030.10 | 3 | 6 | 50 | 4 | 10 |
| 158.030.12 | 3 | 6 | 50 | 4 | 12 |
| 158.030.16 | 3 | 6 | 50 | 4 | 16 |
| 158.030.20 | 3 | 6 | 60 | 4 | 20 |
| 158.030.25 | 3 | 6 | 60 | 4 | 25 |
|
 |
| |
|
