Frese con elica variabile per Alluminio con scarico toriche
Variable helix corner radius end mills for Aluminuim with neck relief
| Applicazioni / Application |
Adatte per fresatura di alluminio, leghe di alluminio, materie plastiche, leghe di rame e materiali non ferrosi. |
| Materiale / Material |
Metallo duro micrograna ISO K05-K10 |
| Norma / Norm |
Standard Utensili Services |
| Rivestimento / Coating |
XBLACK |
| Codice | d1h6
mm | d2h6
mm | d2
mm | l1
mm | l2
mm | l3
mm | r |
| 204.060.05 | 6 | 6 | 5.5 | 57 | 13 | 21 | 0.5 |
| 204.060.10 | 6 | 6 | 5.5 | 57 | 13 | 21 | 1 |
| 204.060.15 | 6 | 6 | 5.5 | 57 | 13 | 21 | 1.5 |
| 204.080.05 | 8 | 8 | 7.5 | 63 | 19 | 27 | 0.5 |
| 204.080.10 | 8 | 8 | 7.5 | 63 | 19 | 27 | 1 |
| 204.080.15 | 8 | 8 | 7.5 | 63 | 19 | 27 | 1.5 |
| 204.080.20 | 8 | 8 | 7.5 | 63 | 19 | 27 | 2 |
| 204.080.25 | 8 | 8 | 7.5 | 63 | 19 | 27 | 2.5 |
| 204.100.05 | 10 | 10 | 9.2 | 72 | 22 | 32 | 0.5 |
| 204.100.10 | 10 | 10 | 9.2 | 72 | 22 | 32 | 1 |
| 204.100.20 | 10 | 10 | 9.2 | 72 | 22 | 32 | 2 |
| 204.100.25 | 10 | 10 | 9.2 | 72 | 22 | 32 | 2.5 |
| 204.100.30 | 10 | 10 | 9.2 | 72 | 22 | 32 | 3 |
| 204.120.05 | 12 | 12 | 11.2 | 83 | 26 | 38 | 0.5 |
| 204.120.10 | 12 | 12 | 11.2 | 83 | 26 | 38 | 1 |
| 204.120.20 | 12 | 12 | 11.2 | 83 | 26 | 38 | 2 |
| 204.120.25 | 12 | 12 | 11.2 | 83 | 26 | 38 | 2.5 |
| 204.120.30 | 12 | 12 | 11.2 | 83 | 26 | 38 | 3 |
| 204.160.05 | 16 | 16 | 15 | 92 | 32 | 44 | 0.5 |
| 204.160.20 | 16 | 16 | 15 | 92 | 32 | 44 | 2 |
| 204.160.25 | 16 | 16 | 15 | 92 | 32 | 44 | 2.5 |
| 204.160.30 | 16 | 16 | 15 | 92 | 32 | 44 | 3 |
| 204.160.40 | 16 | 16 | 15 | 92 | 32 | 44 | 4 |
| 204.200.05 | 20 | 20 | 19 | 104 | 38 | 54 | 0.5 |
| 204.200.20 | 20 | 20 | 19 | 104 | 38 | 54 | 2 |
| 204.200.25 | 20 | 20 | 19 | 104 | 38 | 54 | 2.5 |
| 204.200.30 | 20 | 20 | 19 | 104 | 38 | 54 | 3 |
| 204.200.40 | 20 | 20 | 19 | 104 | 38 | 54 | 4 |
|
 |
| |
|
